The best settings for GTA 6 start outside the game. Rockstar says GTA 6 is “targeting 30 frames per second” on PS5 and Xbox Series X|S, and the PS5 Pro adds PSSR image clarity and ray-traced shadows. Rockstar hasn’t announced a 60 fps mode, so there’s no frame-rate setting to hunt for. What you *can* control is your TV, your console’s video and HDR settings, audio, controller feel and accessibility options. Get those right and GTA 6 will look and feel its best on your hardware.

“GTA 6 best settings”, “GTA 6 graphics settings” and “GTA 6 PS5 settings” are rising fast in launch week. This guide covers the settings that are confirmed to exist on your console and TV, and shows how to check the in-game menu once you start playing. We don’t invent in-game options Rockstar hasn’t shown.

What Rockstar has confirmed about performance

PlatformWhat’s confirmed
PS5Targets 30 frames per second
PS5 ProTargets 30 frames per second, with improved clarity through PSSR and ray-traced shadows only on PS5 Pro
Xbox Series X and Series STargets 30 frames per second
Xbox Cloud Gaming (Series X|S and Xbox One)Streams using Xbox Series S graphics settings, from 1 a.m. ET on November 19

Source: Rockstar’s November 10, 2026 Newswire post and Xbox Wire. Rockstar says the 30 fps target comes “while pushing both platforms to their absolute limits”.

What this means for settings

  • There’s no confirmed 60 fps or “performance mode”. Guides promising one are guessing.
  • Your console’s “Performance Mode” preference may not change anything if the game doesn’t offer a mode. It’s still worth setting, as explained below.
  • Image quality depends heavily on your TV. HDR calibration and Game Mode matter more than any hidden setting.

For a deeper look, see Does GTA 6 run at 120 FPS? and GTA 6 on PS5 Pro vs PS5.

Quick settings checklist

  1. Turn on your TV’s Game Mode.
  2. Use an HDMI 2.1 port if your TV has one, with the console’s included cable.
  3. Run your console’s HDR calibration.
  4. Set Game Presets on PS5 (or check video modes on Xbox).
  5. Pick your audio output (TV, headphones or soundbar).
  6. Tune controller vibration and trigger effects.
  7. Once in the game, check brightness, HDR, subtitles and camera options.
SettingPS5 / PS5 ProXbox Series X|S
TV pictureGame Mode on, motion smoothing offGame Mode on, motion smoothing off
HDROn When Supported, then Adjust HDRAllow HDR10, then Calibrate HDR for games
Game mode preferenceGame Presets: Game DefaultNot applicable
VRRAutomaticAllow if supported
Headphone audio3D Audio for HeadphonesWindows Sonic or Dolby Atmos
DownloadsStay Connected to the Internet in rest modePower mode that allows updates

These are sensible starting points, not official Rockstar recommendations.

Best TV settings for GTA 6

Your TV does more to how GTA 6 looks than anything else you can change.

Game Mode

Turn on your TV’s Game Mode (it may be called “Game Optimiser”, “Game Enhancer” or similar). It cuts the TV’s processing and lowers input lag, which makes driving and shooting feel more responsive. Many TVs turn it on automatically through ALLM (Auto Low Latency Mode) when a console is detected. If your TV supports it, make sure ALLM is enabled in the TV’s settings.

Picture mode and processing

  • Turn off motion smoothing (often called TruMotion, Motionflow, Auto Motion Plus or similar). It adds lag and can cause artefacts.
  • Turn off extra sharpening and noise reduction. They can make the image look over-processed.
  • Don’t max out brightness and contrast in SDR. Use the console’s calibration instead.

If the game feels sluggish, see our input lag guide.

HDMI port and cable

If your TV has HDMI 2.1 ports, use one, and enable the TV’s enhanced HDMI setting for that port (often called “Input Signal Plus”, “HDMI Ultra HD Deep Colour” or similar). Use the HDMI cable that came with your console. HDMI 2.1 matters most for 4K at 120 Hz, which a 30 fps game won’t use, but enhanced HDMI can still be needed for full HDR colour on some TVs.

Best PS5 settings for GTA 6

Game Presets

Go to Settings > Saved Data and Game/App Settings > Game Presets. Here you can set Performance Mode or Resolution Mode to Game Default, Performance Mode or Resolution Mode. This only applies to games that support those modes. Rockstar has announced a 30 fps target, so the game may ignore this setting. We’d leave it on Game Default until you’ve seen what GTA 6’s own menu offers.

The same Game Presets page lets you set default difficulty, camera inversion and subtitles for supported games. It’s worth setting these now in case GTA 6 reads them.

Video output and HDR

Go to Settings > Screen and Video > Video Output:

  • HDR: “On When Supported” if your TV supports HDR.
  • Adjust HDR: follow the three on-screen steps carefully. This is the most important single setting for how GTA 6’s lighting looks.
  • VRR: “Automatic” is fine. Most TVs’ VRR range starts above 30 Hz, so VRR may have little effect on a 30 fps game.
  • 120 Hz Output: “Automatic” is fine. It won’t make the game run faster than its frame rate.

If the image looks grey or flat, see GTA 6 HDR looks washed out.

PS5 Pro

Rockstar confirms PS5 Pro enhancements are built into GTA 6 (PSSR clarity and ray-traced shadows), so there’s nothing extra to switch on in the game for those. Keep your PS5 Pro’s system software up to date. If you’re moving from a standard PS5, see our PS5 Pro transfer guide.

DualSense controller

Go to Settings > Accessories > Controllers:

  • Vibration Intensity: Strong, Medium, Weak or Off.
  • Trigger Effect Intensity: adjust if the adaptive triggers feel too heavy for long sessions.
  • Brightness of Controller Indicators: lower it at night.

Audio

Go to Settings > Sound > Audio Output. If you play with headphones, turn on Enable 3D Audio for Headphones and use Adjust 3D Audio Profile to pick the profile that sounds most accurate to you.

Best Xbox Series X|S settings for GTA 6

TV and display options

Go to Settings > General > TV & display options:

  • Resolution: match your TV (4K UHD on a 4K TV).
  • Video modes: allow 4K, HDR10 and Auto Low-Latency Mode if your TV supports them.
  • Calibrate HDR for games: run it and follow the steps. Like on PS5, it’s the most important picture setting.
  • Refresh rate: 60 Hz or 120 Hz both work. A 30 fps game won’t run faster on a 120 Hz output.

Series S and cloud players

The Series S targets 30 fps like the Series X, with settings tuned for its hardware. Xbox Cloud Gaming uses Series S graphics settings, so a strong, stable connection matters more than any console setting. Use a wired connection or 5 GHz Wi-Fi if you can. See our Xbox One cloud guide.

Controller and audio

Use the Xbox Accessories app to remap buttons and check firmware. See our Xbox controller setup guide. For headphones, try Windows Sonic for Headphones (free) or Dolby Atmos for Headphones under Settings > General > Volume & audio output.

In-game settings to check first

Rockstar hasn’t published GTA 6’s full options menu, so we won’t guess at its exact settings. In past games, Rockstar’s menus included brightness, HDR, subtitles, camera, controls, audio mix and accessibility options. That’s context, not confirmation. When you first start GTA 6, check:

  • Brightness and HDR calibration. Follow any on-screen guides.
  • Subtitles. Size, background and speaker names, if offered. See our subtitles and accessibility guide.
  • Camera. Field of view, motion blur, camera shake and auto-centring, if offered. Turning off motion blur and camera shake can help if you feel motion sick.
  • Controls. Aim assist, inversion and vehicle controls.
  • Audio. Separate music, dialogue and effects volumes, and output type.

We’ll update this guide with the real options once we’ve verified the in-game menu.

Settings by player type

If you…Prioritise
Play on a big HDR TVGame Mode, HDR calibration, enhanced HDMI
Play on a PS5 ProSystem updates, HDR calibration (Pro features are automatic)
Feel motion sickTurn off motion blur and camera shake in-game if offered, and sit further from the screen
Play late at nightHeadphones with 3D audio, lower controller light brightness, subtitles on
Play on Xbox Cloud GamingA wired or 5 GHz connection, close other streaming devices
Have hearing or vision needsSubtitles, controller remapping, the accessibility guide

Common settings myths

  • “Turn on 120 Hz for higher fps.” A 120 Hz output doesn’t make a 30 fps game run at 120 fps.
  • “There’s a secret 60 fps mode on PS5 Pro.” Rockstar hasn’t announced one. Its Pro features are PSSR clarity and ray-traced shadows.
  • “Performance Mode in PS5 settings unlocks 60 fps.” It only applies to games that offer such a mode.
  • “HDR always looks worse.” Usually it means HDR wasn’t calibrated or the TV’s HDMI port isn’t in enhanced mode.

Storage and download settings

Where and how GTA 6 is installed affects loading and updates more than any graphics option.

PS5

  • Install to the internal SSD or a compatible M.2 SSD. PS5 games must run from the internal SSD or an M.2 expansion SSD, not from a USB drive. See our M.2 SSD guide.
  • Keep downloads running in rest mode. Go to Settings > System > Power Saving > Features Available in Rest Mode and turn on Stay Connected to the Internet. See our rest mode downloads guide.
  • Turn on auto-updates so day-one and later patches install automatically.

Xbox Series X|S

  • Install to the internal SSD or an official Storage Expansion Card. Series X|S games built for the new consoles can’t be played from a standard USB drive. See our Xbox storage plan.
  • Set the power mode to allow updates while the console is off, under Settings > General > Power options. See our overnight downloads guide.

Before your first session

  1. Update your console’s system software.
  2. Check the game is fully installed, not just playable from a partial install.
  3. Charge your controller or keep a cable nearby.
  4. Calibrate HDR now, so you don’t have to stop once you’re in Leonida.
  5. Set up spoiler filters on your apps. See our spoiler guide.

A few minutes on these steps means your first hours in Vice City look right and run without interruptions.

How we’ll update this guide

We’ll update this page when:

  • We verify GTA 6’s full in-game settings menu
  • Rockstar announces any new performance modes or patches
  • PlayStation or Xbox add new features that affect the game

Every claim will be checked against Rockstar, PlayStation or Xbox sources.

Frequently asked questions

What are the best settings for GTA 6 on PS5?

Turn on your TV’s Game Mode, enable HDR and run Adjust HDR, and leave Game Presets on Game Default until you’ve seen the in-game menu.

Does GTA 6 have a performance mode?

Rockstar hasn’t announced one. It says the game targets 30 frames per second on current-generation consoles.

Does GTA 6 run at 60 fps on PS5 Pro?

Rockstar hasn’t announced 60 fps on PS5 Pro. The Pro adds PSSR image clarity and ray-traced shadows.

Should I turn on VRR for GTA 6?

Leaving VRR on Automatic is fine, but most TVs’ VRR range starts above 30 Hz, so it may have little effect.

What are the best Xbox Series S settings for GTA 6?

Calibrate HDR for games, allow Auto Low-Latency Mode, and use your TV’s Game Mode. The game’s Series S settings are set by Rockstar.

How do I fix GTA 6 looking washed out?

Re-run your console’s HDR calibration and check your TV’s HDMI port is in enhanced mode. See our HDR guide.